Flynn Front Tron EL Light Set
This listing is for:
1) Two pieces of replica shaped EL Tape for the front of a Sam Flynn Costume - a Left and a Right;
2) A single 1cm X 15cm EL Tape for the glowing mid line;
3) A Powerful 8XAA battery EL Driver - capable of powering a further 300squ cm of EL Tape or up to 15 meters of EL Wire (it will power the "Tron Back Set" plus 2piece 1cm X 15cm of EL Tape);
4) A 3-way splitter.
The Set is available in can be any combination of these colors: White or Aqua(Tron Blue).
The whole kit is ready to use - just plug and play!
Dimensions of the products:
If you are making a costume it is a good idea to plan it out properly.
For this set, the driver/inverter(NV005-2A) is very powerful and comes with a separate power pack.
So here is the dimensions of all the parts plus lengths of wire between them.
THE POWER PACK
Takes 8 X AA batteries (not supplied) and is 6.5cm X 6cm X 3cm
it has a 65cm thin power wire coming out of it that leads to the...
DRIVER
The driver is 6cm X 4cm X 4cm
It has the control which with 1.2 meters wire on it - Off or On
It has a 55cm wire coming out of it that leads to the...
SPLITTER
The Splitter is 40cm long in total,
it is 20cm of wire which then splits into 3 separate strands which are all 20cm long - 2 of them then lead to...
Left and Right Flynn Replica EL Tapes
The tape is just 350 microns thick - that is 1/3rd of a millimeter!
The third channel of the splitter leads to:
The Mid-Line
Sam Flynn has a small line of light that runs down the middle of his chest. This is lit by the 1cm X15cm EL Tape provided. This tape can be easily cut to shape if you prefer it smaller.
SPLITTERS
You can 'daisy chain' the splitters so adding more will allow you to add several more pieces of EL Tape to the set.
Its not complicated or fiddly - I’ve just given all those details if you want to plan your costume before you buy the set - feel free to message me if you have any questions.
The whole kit is ready to use - just plug and play!
OR CONTACT US IF YOU WANT ADVICE PLANNING YOUR SET
A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from us.
This El Tape comes with a standard connector so simply plugs into any EL driver - this makes it easy to change between colored wire on one driver
by using splitters you can also connect different strands to the same driver.
Otherwise, the Flat EL to the costume can be by Velcro..
